3 Wheel Carriage ++
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This a Z axis carriage for 2040 V-Slot only, the wheel spacing is not compatible with normal T-Slot extrusions. To use…
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 93
- Makes
- 0
- Views
- 656
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
This a Z axis carriage for 2040 V-Slot only, the wheel spacing is not compatible with normal T-Slot extrusions.
To use them you will need
-M5 low profile screws 18pcs 8mm
-M5 low profile screws 6pcs 50mm
-2GT 40 teeth Pulley 2pcs
-800mm timing 400 teeth 2GT belt
-6mm 2pcs
-6mm 10pcs
-Threaded Rod 8mm
-8mm nylock nuts
To lead screw to correctly align you need 6mm wheel spacers and eccentric nuts.
Please consider donating a pizza or a spool of filament.
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
20%-50% HEX
Filament: Any Any Any
Notes:
Any donations towards filament would be greatly appreciated.
300mm bed
The CR-10/Ender 3 design is very space efficient, you can cut the Z or X 2040 extrusions in 2 pieces of 160mm, and replace the 150mm that connect the Y axis to the Z axis an you will have enough space to use a 300mm heated bed. Don't forget to buy/cut the rest of the extrusions to size.
Category: 3D Printer Parts