Y Axis
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Improved Y Axis for 3030 Alu Extrusion Frames. Provides rigid Y belt anchoring and low profile for rods attachment.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 47
- Makes
- 0
- Views
- 678
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Improved Y Axis for 3030 Alu Extrusion Frames. Provides rigid Y belt anchoring and low profile for rods attachment to avoid collisions with bed levelling screws.
Increase height of the Y carriage from the bearings (washers or longer M4 screws with an extra nut as a spacer)
Drill/Acu electric screwdriver with 6 mm, 3 mm (and 2,5 mm) drill bits may be needed for adjustments (holes for mounting to frame, for mounting the Y motor and slot in BeltAttachmentBody for BeltAttachmentPart to slide more easily)
Needed:
- 4x Zip-tie 3,5 mm wide
- 9x M6 short screw - 15 mm (for mounting to the alu extrusion)
- 9x M6 T block square nuts
- 1x M6 hex head long screw - 40 mm (to insert into Y_BeltAttachmentPart)
- 1x M6 hex nut (for Y_TensioningKnob)
- 1x M3 long screw - 20 mm (for pulley)
- 4x M3 short screw - 15 mm (to mount the motor)
- 1x M3 nut
- 1x GT2 Idler Pulley 16T W6 B3
- 1x GT2 Timing Pulley Bore 5 mm, 16T
- + M3, M6 washers/spacers
Compatible with: https://www.thingiverse.com/thing:2527100, https://www.thingiverse.com/thing:2807810 or https://www.thingiverse.com/thing:3401790