1 / 1
BMW ZF5 Shift Pin Punch Tray
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tray to hold your shift detent pin punches
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 44
- Makes
- 0
- Views
- 525
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple tray to hold a set of shift detent pin bushing and cap punches, required for replacing shift detent pin bushings on a BMW ZF5 manual gearbox. It should fit my punch models, or the commercially available metal punches from Thayer Motorsports.
There is roughly 0.5mm of clearance all the way around each punch, to allow for a nice fit without the punches hanging up when removing them from the tray.
Recommended print settings:
- 0.16mm layer height
- 5 top/bottom layers
- 3 perimeters
- 15% infill