MK3s IR_Sensor LED Indicator (non-MMU)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Add LED and current limiting resistor to your IR Sensor. Two color print - MMU required.
- Rating
- 5 / 5
- Likes
- 36
- Downloads
- 200
- Makes
- 0
- Views
- 3,483
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
Need to give credit to ticktock for the original idea.
FYI: Two color print - MMU required. The indicator uses a green 1206 SMD LED and 22k-ohm SMD resistor. Wanted low current draw and low brightness from LED.
Obviously the tiny window should be printed with a clear or light colored filament.
Working with SMD components can be frustrating, and you could ruin your IR_Sensor board. I glue the SMD parts in place on the end of the IR board near +5V and Signal pin-outs, then carefully solder. Will add wiring diagram image as well. SMD Soldering at Home . . . Google for: wire wrapped around end of soldering-iron tip to reduce tip size.