PTFE Tube Cutter
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.60 – €0.73 net (excluding VAT)
For file: PTFE_Tube_Cutter_M3_0.2mm_PLA_MINI_44m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.67 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 43.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Cuts PTFE tubes with an outer diameter of 4 mm.
- Rating
- 4.769 / 5
- Likes
- 126
- Downloads
- 912
- Makes
- 19
- Views
- 5,330
- Reviews
- 13
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
PTFE Tube Cutter
This cutter cuts PTFE tubes with an outer diameter of 4 mm. The printing time is less than 50 minutes and the assembly time is about 1 minute. The PTFE Tube Cutter is a remix of my filament cutter (see here).
The following materials are needed for assembly:
- 2x M3 cylinder head screws (length: approx. 4 mm)
- 2x M3 hexagon nuts
- Snap blade (blade width: 9 mm, 3 parts/segments)
My Print Settings
- Printer: Prusa MINI (0.4 mm nozzle)
- Rafts: No
- Supports: Yes
- Resolution: 0.2 mm
- Infill: 20 %
- Filament brand: Verbatim
- Filament color: Red
- Filament material: PLA
Tips
- If you print the cutter with supports (see 3mf or gcode file), then the supports (in the cutting slot) can be loosened and removed very well and easily with the cutting blade when assembled.