1 / 2
LED Strip Mount for Printer Enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This LED Strip Mount is based on two parts which can be connected to reach a total length of 400mm.
- Rating
- 5 / 5
- Likes
- 48
- Downloads
- 352
- Makes
- 2
- Views
- 2,070
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This LED Strip Mount is based on two parts which can be connected to reach a total length of 400mm. I used Prusament PETG and wouldn't recommend PLA (believe me I tried and the 24V Strips I used get a little too warm for a longterm use).
After I sticked both parts together, I used double sided tape on the back and sticked them to the top. Afterwards I used 3mm screws to make sure nothing will come apart.
Print instructions
I used the standard Prusament PETG settings in PrusaSlicer (no support and 15% Infill)