HexScraper with Magnet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The HexScraper with an embedded magnet for hanging on metal surfaces (metal desk leg, MK3 PSU, etc.)
- Rating
- 4.714 / 5
- Likes
- 33
- Downloads
- 175
- Makes
- 9
- Views
- 1,671
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The same great HexScraper, but now with more magnetism! The embedded magnet allows you to hang the scraper on a metal surface, such as a metal desk or the PSU on the side of the MK3/S/S+.
The magnet pocket is sized for a 9.5mm x 3.2mm neodymium disc magnet. I used these. A print pause at the appropriate layer is used to insert the magnet.
The supplied g-codes all include the print pause, use 3 perimeters, and have 1mm - 1.2mm top & bottom thickness.
PrusaSlicer defaults to a 0.2mm first layer height on 0.1mm through 0.3mm layer settings profiles, so I'm not sure that using a 0.1mm-0.2mm layer height really matters much for the end result. I ended up “sharpening” the edge with some sandpaper on a flat surface; coarse grit (~220) followed by fine grit (~2000). After this little bit of post-processing, it's super easy to slide the scraper under things on the print sheet.
I went a little cray-cray with the g-code files, but hopefully you can find something that suits your needs! If not, there's always the model file to slice yourself to your liking.
Change Log:
- 25FEB2023 – Corrected print time error on model overview.