Zipper Handle/Pull
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple zipper handle/pull - make a replacement handle with a piece of 2 mm wire.
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 98
- Makes
- 1
- Views
- 1,070
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
It happens that the zipper breaks and the handle/pull no longer works. In the past, a safety pin was used as a replacement, but it looks silly and is a poor substitute.
With this model and a piece of 2 mm steel wire (AWG 14), the repair can be done in a short time and the handle can be printed in a color that matches the garment.
The holes for the hanger are about 18 mm deep and will usually hold by themselves - if the hanger is loose, you can put some glue in the holes before inserting the hanger.
>> If you like the model, please leave a like, a make or give it a rating… ;-)