1 / 7
Mounting Bracket for FPV Camera AKK KC53
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you're using heat-set inserts instead of Legos, you can use the case with this bracket & 3mm screws.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 42
- Makes
- 1
- Views
- 485
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
The simple case for the FPV Camera AKK KC53 by Maschinist RaumZeitPiraten is great!
However, I was not using Lego. I used my soldering iron to place some heat set inserts, and created this glue-able mounting bracket to fix my FLV camera to my Eclipson Model A RC plane (also 3D printed).
Print Settings:
- ❗ Be sure to use PETG or higher temp plastics for the case. This camera can get hot enough to deform PLA. The bracket can be printed in PLA.
- 0.15 - 0.3mm layer height
- NO supports needed
- 15% or higher infill
I used;
- (2) - 3 x 4mm Socket Head Cap Screws
- ❗ I don't recommend longer screws, as they may push into the camera, causing a short and bricking it. As always, use at your own risk.
- (2) - [initeq] M3-0.5 Threaded Heat Set Inserts for 3D Printing