1 / 7
Mounting Bracket for FPV Camera AKK KC53
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you're using heat-set inserts instead of Legos, you can use the case with this bracket & 3mm screws.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 42
- Wydruki
- 1
- Wyświetlenia
- 485
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
The simple case for the FPV Camera AKK KC53 by Maschinist RaumZeitPiraten is great!
However, I was not using Lego. I used my soldering iron to place some heat set inserts, and created this glue-able mounting bracket to fix my FLV camera to my Eclipson Model A RC plane (also 3D printed).
Print Settings:
- ❗ Be sure to use PETG or higher temp plastics for the case. This camera can get hot enough to deform PLA. The bracket can be printed in PLA.
- 0.15 - 0.3mm layer height
- NO supports needed
- 15% or higher infill
I used;
- (2) - 3 x 4mm Socket Head Cap Screws
- ❗ I don't recommend longer screws, as they may push into the camera, causing a short and bricking it. As always, use at your own risk.
- (2) - [initeq] M3-0.5 Threaded Heat Set Inserts for 3D Printing