1 / 2
Voron StealthBurner CR Touch Mod for Switchwire (Tool Less)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the STL for Voron SW SB / EnderWire CR Touch Mod
- Rating
- 5 / 5
- Likes
- 99
- Downloads
- 533
- Makes
- 7
- Views
- 4,138
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This repo contains the STL for Voron SW SB CR Touch Mod.
I used the SB 1.05Beta during development. But it should work on the SB v1 release as its only X rail carraige.
- The STL is only for MGN12 Carraige for SW
- No supports are needed during the print
- No tools are needed to fit the CR Touch, its a press fit
- I used Dragon Standard hotend for deciding height of CR touch and its 2mm above the nozzle when pin is up
- It should work with other hotends as well (Hotends of same form factor as Dragon)
If the STL helps, do star my repo: https://github.com/prasadp4009/SW_SB_CRTouch