Setup Scope Mounts (1"/11mm Dovetail)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.66 – €2.03 net (excluding VAT)
For file: 2pcs__ScopeMount_Dia25_Dovetail11_LOW__0.2mm_PLA_MK3S_2h21m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.84 excluding VAT (range midpoint).
- Weight reported by the author
- 16 g
- Print time reported by the author
- 2.18 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Scope mounts to find out the proper mounting height.
- Rating
- 5 / 5
- Likes
- 68
- Downloads
- 903
- Makes
- 1
- Views
- 4,130
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The scope mounts allow you to quickly and easily find the proper height. The mounts fit on an 11 mm dovetail and fit scopes with a tube diameter of 1" (25.4 mm).
Have now added the mounts in 30 mm as well.
The heights correspond to those of the Sportsmatch UK 1" mounts:
| 3d printed model | Sportsmatch category | Height (A) |
| LOW (L) | 1" Low (Dovetail) | 13 mm |
| MEDIUM (M) | 1" Medium(Dovetail) | 19 mm |
| HIGH (H) | 1" High(Dovetail) | 29 mm |
And this for the 30 mm mounts:
| 3d printed model | Sportsmatch category | Height (A) |
| MEDIUM (M) | 30 mm Medium (Dovetail) | 15 mm |
| HIGH (H) | 30 mm High (Dovetail) | 21 mm |
| EXTRAHIGH (X) | 30 mm Extra High(Dovetail) | 27 mm |
Printing
To get good stability, specially in the dovetail clamping area, all parts should be printed with at least 3 perimeters.
BOM
In addition to the printed mounts, you will need the following parts:
- 2 pcs. Cylinder head screw M3 x 12
- 1 pcs. Button head screw M3 x 20
- 3 pcs. Nut M3 (or better Locknut)
- 1 pcs. Washer 3.2
Warning
The holders should only be mounted for testing or to find out the proper mounting height. For shooting, the scope should be firmly mounted with the corresponding metal mounts.