Counting matching models…
Create a minimalist and efficient workspace with this vertical laptop stand. By holding your laptop upright, it frees up significant desk real estate and promotes better heat dissipation for optimal performance. This universal stand…
22mm picatinny rail adapter to use in 11mm rail. Needs: 1x 20mm m3 screw 1x m3 nut
The scope mounts allow you to quickly and easily find the proper height. The mounts fit on an 11 mm dovetail and fit scopes with a tube diameter of 1" (25.4 mm). Have now added the mounts in 30 mm as well. The heights correspond to those…
picatinny adapter 20mm to 11mm (lower adapter to avoid raising the sights more)
The adapter is designed to connect a hose to a thread G1/2". Available diameter for hose: 7 | 7,5 | 8 | 8,5 | 9 | 9,5 | 10 | 10,5 | 11mm Print instruction: material: PETG layer height: 0,2mm (0,3mm) nozzle: 0,6mm (0,4mm) support: no…
A light frame for 11mm servo - weight is just around 2,4 - 2,6g Designed for a Graupner C2081 Servo - but other 11mm servos like Hobbyking 939 should also fit. To create a left and right version mirror the STL file in your slicer Print…
There are several variants of e-chain. E-chain ends are compatible with all variants. Segments can turn to both sides (in photo down) Segments are turnable just to one side. Good for horizontal orientation of the chain. (second photo)…
The adapter is recommended to print vertically at low print speed, 100% full, with m3x14 screws for mounting. It is necessary to use a filament with a very good connection of the layers.
I've been working from home for the last several months and I felt myself constantly readjusting my chair because I prop up my feet and I slide back. I've been using them for 2 months, no problems so far. Increase wall count, there is a…
Easy to print! Print with e.g. 7 walls to make it solid. No supports or brim. May use mouse ear if you want. Use manual seam painting and place it on the middle of the standoff, not on the prongs/nubs on the ends.
Simple front sight that slides onto any 11mm dovetail rail as an end piece. Should fit very tightly without any play. Has a slot for a short piece of 1.75mm filament or optical fiber to serve as the dot. Designed to shoot a Steel Breech…
I wanted a decent scope on my Crosman 2250b Ratcatcher so made this. It holds in place on with the force of the scope clamp being tightened and I've had no issue with mine for years.
Small wrench for 11mm nut which is used to hold kitchen or bathroom faucet. For easier mount I also printed a 40mm bushing because threaded rod was very long. I've uploaded few versions of this wrench. If you use bushing then it's…
This is a remix of the existing model that fits for the thicker MacBook Pro (2023 model) and the iPhone 14 Pro with leather case. Hook is 5mm wide and slot for iPhone is 11mm wide. On the last image is the comparison with another model…
Designed to change the mountangle and adapt for 22mm Mount 1.3 and 5 deg version
Thanks to @Trajan_142247 for his 9mm Hook. I needed a slightly longer version to fit my needs. Thought to share in case someone else needed this. Cheers 🍻 P.S. Is supposed to be a flush fit with the HSW insert but I probably need to…
PRUSA 3RC Based remix, shorter, without branding for 2x faster printing. Print 2 in 3 hours instead of 1 in 3 hours. Branding removed for easier disinfection as stated by hospital staff. Print instructions No brim required, place 2 in a…
they are thicker than the orginal scales but you can scale them down if you want.
Replace a lost non-metric M11 tube cap. Usually found on shoe paste, glue or mustard tubes. Just measure your tubes thread. If it is 11mm wide and got 3 thread layers. This cap will fit.
I needed an x-acto cover to print in bulk and I couldn't find any designs I liked that fit the larger handles for #2 blades. These will fit handles with 11.2mm-ish (7/16"ish) collars. I like this design because: it prints quick no support…
I needed a hex socket with a hole in the middle for mounting my kitchen Crane. Printed with PLA+ @0.2mm layerheight 15% infill
This is a spacer I made for my adaption of attaching the Luna Float seat to the Veteran Sherman
Print a couple of these guides to help you drill your mast and booms. They are designed for 11mm round spars, such as the ones from Sailsetc or PG. The holes are 1.5mm. Just drill them out if you need a slightly larger hole. The top of…
Non-standard metric size Allen keys: 11mm, 13mm and 15mm. Screwdriver with 15mm Allen Key Shank Combines screwdriver functionality with a 15mm Allen key. Allen Keys: 11mm, 13mm, 15mm Perfect for hex bolts and screws. Print settings Layers…
A cable gland for cables with an outer diameter of 11mm and with a M16 thread. I used it together with the junction box https://www.printables.com/de/model/775897
11mm Dovetail rail replacement for the Remington Express air rifle's rear sight. Uses the existing holes in the receiver that the sight originally mounted with. The many holes in the mount are for scope stop pins, which are on a lot of…
I designed this to make tightening coax cables easier without a wrench. Wrenches are not recommended as they can break the connector if you apply too much force. These finger wrenches allow more mechanical advantage without risk of…
I was looking for a small case for my home assistant pi 4 setup. I am using the geeekworm x862 ssd drive along with the 11mm embedded heatsink. This is a remix of https://www.thingiverse.com/thing:3714695 .
If you want to make me happy and you have Discord, join my server ;) https://discord.com/channels/974098819379777566/1053870875444785163
These tiny ampoules are very difficult to both hold and draw from at the same time. They can stand on their own but just barely and tips over at the slightest touch. This ampoule holder gives it the stability to stand easily and be…
3mm, 5mm, 8mm, and 10mm Speaker Baffles for the CRude Engineering 15x11mm Sugar Cube Speakers Speaker for sale on https://crudeeng.com/products/256019636071 Use code PRINTABLES for 25% off your speaker order!
Couldn't find a design to fit a 30mm scope to a 9-11mm dovetail rail, so made one. This seems to work fine for holding an old Gamo red dot scope to an HW40. Two sizes included - normal and thin. I recommend the normal size. I printed both…
Used to insert an 18mm glass piece in a 11mm ish bong opening
cortador pet botella con espacio para una platina metalica de 1.5 mm para protejer el plastico de desformacion,
Generated with Rhino 7, Grasshopper, and Kangaroo
Liquid funnel for refilling e-liquid bottles with an opening of 11 mm (Chubby Gorilla Unicorn 60 ml). Optimized for a quick liquid flow, makes refilling your bottles from a big flask fast and easy going. Print instructions Printed with:…
Tested materials: PLA, PETG, ABS, ASA Tested layer height: 0.2mm (thread is toleranced therefore) Tested printers: Bambu X1C (Bambu Slicer), Voron 0.2 (Cura) NO supports needed, but you will need a few seconds more to assemble the inlets.…
version for table raised by 11 mm with spacers. For setup https://www.printables.com/model/1202837-air-duct-for-chc-hotend-installed-on-k1c-creality
This one has not been tested yet but is using the same design as the 14mm which has been tested. I made this 11.4mm inside. Tolerances are 0.2mm so print this first- https://www.thingiverse.com/thing:3569489 More sizes to come. I…
11mm diameter sheave block designed for use on an rc sailboat. For assembly you will need the 3 printed parts along with a piece of filament and 150mm of line ~1mm in diameter. Assembly First clear out the two small holes on both body…
Korsar dovetail 11mm to STANAG (Piccatiny) rail adapter, Use ABS with support
Introduction This is a 6mm (1/4 inch) hex-bit driver I made for my 111mm Victorinox SAK. It will only work with 111mm Victorinox knives, but I will make one for 91mm ones as well once mine arrives. I tried to make it as durable and…
Two drilling depth sensors that cover the drill diameter from 1 mm to 11 mm. It is convenient to have only 2 limiters instead of 5 or 6. They are easier to find storage space, they take up less space in the case for a screwdriver or…
Hikvision base, one tilted by 14°, one normal. With hole for a PG16 grommet for ethernet cable. Included small grommet/end cap for microphone cable, if you have "-IS" version. A low ring is for testing. Layer 0.25mm, Nozzle 0.4mm, Infill…
Print on the side to avoid overhangs and ensure the best strength. If you want it tighter you can downscale it a little bit. You can also use “break to bodies” button in your slicer to print a single piece and test the fit. p.s. Please…
Very small and simple pill box - 24mm x 11mm. Can be printed with standard (will work fine) or high settings (nicer look).
I'm unhappy with how this has turned out, it wobbles too much to be useful. Use my updated design, V2 which clamps to the barrel properly and securely. It is a great improvement. For mounting a dovetail optic on a barrel. Either on the…
Differences of the remix compared to the original I took an already remixed version, from the1maximus, I really liked how he had created Betweeners that matches the corner profiles. I didn't need the LED 45 degree mountings so I removed…
T-Shaped laminate floor space for expansion gap. I printed 30 of these and used two per board length and 1 per edge. You may need more, if you do just print more. My flooring was 8mm thick with 3mm underlayment. I set this up for 11mm so…
Needs to be printed with support. I printed in translucent Petg. Follow any other instructions from original print.
Needed a mount for my Fluval planted light that would fit a 20-gal long rimmed tank, and saw this one made by Nolibert. However, it wouldn't work for my tank or light since it's far too small, so I made some minor adjustments. Tank grip:…
Customized version of http://www.thingiverse.com/thing:16627 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=16627 Instructions Using the following options: idler = 1 no_of_nuts = 1 pulley_b_dia = 20…
Hose adapter 11mm to 7 (from an 11 mm valve to a 7 mm pipe) Adaptateur de tuyau de 11 mm à 7 (d'un robinet de 11 mm à un tuyau de 7 mm) Print Settings Printer: Artillery SideWinder X1 Rafts: No Supports: Yes Resolution: 0.2 Infill: 10…
I have a newer honeycomb from XTool and the holes are 11mm in size and the hurricane bases for this alignment tool is 8mm. So they didn't work for my honeycomb and I design a new base to accommodate my honeycomb.…
I always find myself searching and rummaging through my toolbox for the right wrench. To solve this, I decided to organize them neatly on my Honeycomb Storage Wall. However, I didn’t want to place each one into a specific holder manually.…
Couldn't get the mounting rings i wanted, at least not for a reasonable price, so i designed my own. 11mm Dovetail Mount as found on many air rifles and the like. On PCP / low power rifles the mounts are sturdy enough. Depending on the…
Klucz do baterii umywalkowej 11 mm Długość klucza 80 mm dodatkowo kwadratowy rządek natkę grzechu. Dodaj także plik .step do zmiany.
Raiser for doe rolling pin. Attach these to the end and you will exactly 3mm high dough. Really good in case you are making thin sheets of sugar coating to cakes for example. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts:…
A cover for the X-ACTO Knife with a 7/16" (11mm) Handle
The housing was designed to mount a toggle switche on my Ender 5 to switch the build plate lighting. Of course the housing fits other Printers as well which use the 20mm extrusions with 6mm slots. For mounting you will need two screws M4…
An adapter for fitness ball pumps for replacement of lost one.
So far, I always end up searching and rummaging through my toolbox for the right spanner, and the small ones always seem to hide beneath all the other clutter. That’s why I decided to try organizing the small XS spanners (4-11mm) neatly…
Wall file holder for files with 3.5mm and 11mm shaft diameter. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0.2 Infill: 50 Filament: PLA PLA Green Category: Organization
My Sun Dolphin kayaks had foam rubber drain plugs that were in bad shape, so I created replacements in Tinkercad. The kayak drain hole is 11mm, and this drain plug is 11.5mm in diameter. Printed in TPU and hollow (three outer walls) so…
This is an extended Gen1 chassis to make custom hardbodies fit xmods chassis. Use the body jig (sized to a standard chassis not the extended) and body clips to make the new body meet the old chassis. You can find the rear clip and many…
“same same but different” in size ;-) compared to https://www.printables.com/model/1119726-hsw-quick-sort-xs-spanner-holder-4mm-11mm copy: … The slanted cone design almost automatically sorts the spanners by size and visually highlights…
Wanted to make putting cages into free-roam area easier - this handle allowed to hook the top of the cage and as a result there was no need to reach all the way down to pick the cage up by the bottom. There is enough space between the the…
Druckereinstellungen: Vase-Mode Material egal
Simple clip to hold an 11mm hose in place, clips to the edge of a Emsa/Poetic Casa Mesh balcony-railing-pot. Great for drip-hoses and automatic plant-watering systems. There are two versions standard and simple, the simple one should be…
The stock caps that come with precision knives are notoriously easy to lose, crack over time, or slide off unexpectedly. This design offers a tight, reliable friction-fit replacement tailored for the two most common hobby knife handle…
IKEA uses 10mm wheel pins for the budged Huvudspelare chair, on wheels that give up after about two months. Made a replacement insert which lets the chair use 11mm pin wheels. Tested up to 130kg, no long term wear & tear experience so…
Quick wrench design to fit the recessed potentiometers in the Roland MC-307. Unfortunately not a perfect fit (I scaled the hex bit to 11.2mm, very tight but with a little downward pressure it will latch on to the nut!), it will get you…
The push pin dimensions are 11mm wide x 13mm height 11mm base x 5mm height, neck 5mm diameter x 6mm height, top 8mm diameter x 2mm height I didn't realize under after modeling the section that the magnet isn't center with the hook section…
To replace a broken impellerto replace a broken impeller. Gaps of ≈ 1mm. the size has been changed, the outer diameter, the inner part has been removed.
Need a little extra room in your shirt? This Button Extender is the perfect solution! Designed for 11mm diameter buttons , it allows you to extend your shirt buttons without sewing or permanent changes. Features: Works with standard shirt…
Mounting block 11mm Bar for smartphone holder replacement baseplate. These blocks fit to a 11mm motorcycle holder. You can use this mounting block for these smartphone mountable holders:…
Caddy for standard 25mm or 1" bobbins I wanted this to be easy to grab the bobbins, secure but not snug, and reversible so you can use a second one as a top
If you lose your screw hole cover or never had it (like me) - just do it by yourself (print it!). If your hole have stepped profile like on photo - maybe it's yours. Sizes: 11mm external size of internal circle 14mm external size of top…
Included the insert that can be placed without supports
BRB Hexagon Tile Spacer 11mm
Print Orientation: Print standing upright (as mounted). Enable supports for pegs.
Baseus Qi2 MagSafe Car Mount – 1/4"-20 Snap-Fit Holder Simple and solid snap-fit holder for the Baseus Qi2 / MagSafe charger (60.5mm × 11mm) . Designed to mount to standard 1/4"-20 arms (Ulanzi, SmallRig, suction mounts, etc.) using a…
Download a tee for connecting water lines. The first version, V1, has hoses with an internal diameter of 16 and 11 mm, while the V2 version only has hoses with a diameter of 16 mm. ----------------------------------------------- -…
Nie wieder schiefe Gewinde, dank dieser praktischen Vorrichtung.
?????????? Switch box for on-off toggle switch. Switch hole standard 30x11mm. The files contain symbols ready to print for heating and cooling, if you want to use this to control the heating and air conditioning of a car or similar…
Nie wieder schiefe Gewinde, dank dieser praktischen Vorrichtung.
A slip‑fit bell punch designed for an 11mm Centre punch like the BAHCO 3735N‑6‑150. This tool centers punches and on round shafts, giving you accurate, repeatable marks without wobble or guessing. The bell drops on, aligns instantly, and…
Protect your trampoline legs from damage when securing them with ground stakes using these flexible TPU protectors. Designed specifically for use with 11mm diameter U-shaped stakes, these sleeves sit between the metal stake and the…
Aio tube comb for Tryx Panorama SE360, but can work with other 11mm tubes
Needed a G1/4-20 thumb screw for a printed J-Arm, but did not want to pay almost $1 per screw. Pops over the head of hex bolts with a ~11mm | 7/16 head. My bolts measured at 11.1mm, different sizes will require scaling.
Another tube connector for OpenFormicaria. If you want a tube connector for another dimension that hasnt been modeled, then you can head over to https://github.com/schemen/OpenFormicaria and download a FreeCAD file to modify. You can also…
Hardware required: 1. 1-3 Hex Nuts 1-4/20 Unc (Up to you, just liked more options if you wanna mount this differently) 2. 2 Case Fan Screws Can be sandwiched between a regular sized fan screw and a metal grill to protect your fingies,…
I can also ship ready-made, 3D-printed parts worldwide. Feel free to send me a private message for more information. Used in various Mercedes-Benz car models from 2007 up to 2016 in E-Class C207, A207 and C-Class W204, S204. If you need…
I can also ship ready-made, 3D-printed parts worldwide. Feel free to send me a private message for more information. Before installation, remove any rust by sanding the ball joints with approximately P240 grit, and clean off any dust or…
I can also ship ready-made, 3D-printed parts worldwide. Feel free to send me a private message for more information. Before installation, remove any rust by sanding the ball joints with approximately P240 grit, and clean off any dust or…
Before installation, remove any rust by sanding the ball joints with approximately P240 grit, and clean off any dust or debris. When assembling, apply a generous amount of thick grease to the joints to ensure smooth movement and…
