1 / 9
Easy Ender 3 V2 Display Mount (Tight fit)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Needed a tighter design for my printer enclosure while it doesn't interfere with the printer mechanics.
- Rating
- 4.667 / 5
- Likes
- 24
- Downloads
- 196
- Makes
- 4
- Views
- 1,297
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Installation:
- Print parts
- Remove original display stand from display & printer
- Remove black cover from the bottom right aluminium frame
- Insert printed parts on the 2 pins behind the display (1. Photo: make sure to place parts in the right direction)
- Insert assembled parts slowly 1 by 1 into the top right extrusion hole of the frame
- If needed: Cut the right amount of material of the top right corner from your drawer to not interfere with the display (2. Photo)
- Place cover back on frame and make sure nothing interferes with printer bed / display
There might be a little force needed to place the parts in place since I designed it to have a tight fit.
To test the stability of the design I did the mandatory wiggle test, applied some force at the corner of the screen but didn't note any problems and seems very stable.
Recommended printing parameters:
- 60% Infill
- 0.2mm Nozzle Diamenter
- No support