Original Prusa Enclosure Webcam Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A very simple webcam mount for the Original Prusa Enclosure with a 1/4 inch thread (for standard tripod/camera screws)
- Rating
- 4.875 / 5
- Likes
- 86
- Downloads
- 328
- Makes
- 5
- Views
- 3,472
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v2.0
I wanted a very compact and simple webcam mount for my Logitech C920 with a standard ¼ inch thread to attach to one corner of the Original Prusa Enclosure.
On one side, it has a 2.8mm hole to attach with an M3x8 screw (use one of the spares that come with the enclosure).
On the other side, I've modeled a standard ¼"-20 screw. You can use adapters like the one in the picture (male-to-male ¼"-20) to then attach any camera (like this one: https://www.amazon.co.uk/Standard-Threaded-Mounting-Converter-Precision/dp/B074J4Z7ZF)
The lateral angle will be fixed on a C920, but the angle will work well for Octolapse with “Centre-Right” extruder stabilisation (you can still change the vertical angle using the camera mount swivel). I've included a (very blurry!) picture of what the angle loooks like.
Printed with PETG at 0.2mm with default settings and it works like a charm.
EDIT: Check out @Torpi's screw adapter here: https://www.printables.com/model/405904-standard-14-20-male-to-male-screw if you can't find one where you live (or you'd rather print your own!)