1 / 6
Arduino Mouse Jiggler/Mover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Universal and automatic mouse jiggler: as easy as possible, easy to print, only two printed parts, easy arduino code…
- Rating
- 5 / 5
- Likes
- 65
- Downloads
- 204
- Makes
- 1
- Views
- 3,806
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Universal and automatic mouse jiggler:as easy as possible
- easy to print: only two printed parts
- easy arduino code (see below)
- no batteries -> power via usb#
- no software/drivers on the Pc while using
- easy schematic
additional parts (about 12€)
- 1x 608 skate bearing (0,5€)
- 1x arduino nano (6€)
- 1x usb cable (2€)
- 1x microswitch (0,5€)
- 1x transistor eg. BC327 (0,1€)
- 1x mini servo motor (1,5€)
- 1x hairpin or a piece of stiff wire (0,1€)
and some hot glue and cable ties to fix the parts in the case.
arduino example code: (i used output pin 5)
void setup() {
pinMode(5, OUTPUT);
}
void loop() {
digitalWrite(5, 0); //ON
delay(25); //wait
digitalWrite(5, 1); //OFF and wait long time
delay(10000); //wait
}