1 / 11
Commodore 64 Joystick
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
There are 2 joystick top parts: One for sanwa type joysticks with 45mm mounting holes. One for joysticks with 32mm…
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 76
- Makes
- 0
- Views
- 1,125
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
There are 2 joystick top parts:
- One for sanwa type joysticks with 45mm mounting holes.
- One for joysticks with 32mm mounting holes.
You will need 4: 3mm x 30mm screws for the joystick and small 2mm screws for the cable clamps and connector cover.
If you use a female db9 connector, you might have to file a tiny bit off the sides, as I have made the connector covers the widest they could be while still allowing 2 joysticks to fit in the c64.
The holes for the buttons are 24mm.
Category: Video Games