Modular Camera Mount MK3 / MK3s for YI Home and Others
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.98 – €1.19 net (excluding VAT)
For file: nuts-and-screws_015mm_pla_mk3s_1h21m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.08 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 1.35 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Here is my design of a modular camera mount that snaps onto the aluminium extrusions of the MK3/s frame.
- Rating
- 4.5 / 5
- Likes
- 38
- Downloads
- 180
- Makes
- 1
- Views
- 1,887
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Here is my design of a modular camera mount that snaps onto the aluminium extrusions of the MK3/s frame. The provided mounting plate is suitable for the "YI Home Camera 1080p", however I've provided fusion files so you can design a cutom mounting plate for your own camera.
The print contains all required parts and no extra hardware is needed.
All parts are optimized for FDM printing (the threads and the radiuses on the arms) and you'll only need supports on the arm that goes onto the mounting plate.
Assembly guide:
- Print all of the provided .3mf or .gcode files. The provided gcode and .3mf prints all parts as shown in the pictures, however you can individually interchange the parts. Print in PETG for longer durability.
- Connect each arms with a screw and a nut. You might need a bit force if you use them the first time.
Install the Frame connector only in the bottom right corner or it might interfere with the U-bolts.- Move the bed up and down and check that.
- Use the cable clips to hide the wires below the arms.
If you're using a different camera, you will find the fusion file to model a custom mounting plate here.
+++++++++++++++++++++++++++++++++++++++++++++++++
If you like this file or need some adjustments feel free to leave a comment. A rating or tip is also welcome and may check out my other designs!
Happy printing!
Print instructions
- Print all arms with 0.2mm layer height.
- Print the nuts and screws with 0.15mm layer height.
- Use PETG for longer durability
- Use the given alignment of the parts
- Use supports on the mounting plate connector arm