MPCNC Mounts for Endurance Laser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This contains a 3d model of the 8.5w laser I got from Endurance Lasers, as well as 2 mount options to attach it to the…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 141
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This contains a 3d model of the 8.5w laser I got from Endurance Lasers, as well as 2 mount options to attach it to the MPCNC.
The model isn't perfect, but all the dimensions are accurate enough.
The laser attaches with 4 M3x12mm screws.
Mount option A keeps the laser above the bottom of the carriage, so the laser can`t possibly hit the workpiece even if it goes down too far. However, with it only supported by 2 screws it might tilt every so slightly.
Mount option B doesnt extend as far, but can be mounted higher on the machine for the same effect. Its attached by 4 screws so tilting isn`t an issue. I recommend this one.
The fusion 360 models for both are included so you can customize to your liking.
Category: DIY