Corsair 280X Feet Extensions
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This case is wonderful, but it has one big problem. The original feet are to short (10mm).
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 123
- Makes
- 2
- Views
- 616
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
This case is wonderful, but it has one big problem. The original feet are very short (10mm). If you install a large graphics card, it doesn't get enough airflow from the bottom side. These feet are a "drop in" replacement, just unscrew the old ones and screw them back on with the SAME screw. So that the feet do not pass on any vibrations, I recommend sticking the rubber from the old ones to the new ones.
Needed parts:
- Just the original screws
Print Settings:
- i printed mine with 0.2 height and 0.4 width, but i should work with another settings.
- Supports? Not needed.
- This was printed on a Custom CoreXY Printer, so the gaps and clearances that I designed in the model might not be optimal for your printer!
Print Time: (on my Printer)
- All 4 at once: 46m