1 / 2
Phillips Hue Play Bar Mounts Sim Racing
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple mounts to be able to install your Play Bar Phillips Hue lights above the sim rig.
- Rating
- 5 / 5
- Likes
- 68
- Downloads
- 607
- Makes
- 2
- Views
- 4,110
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Here is the Phillips Hue play bar mount that I made for my
Hardware needed (per arm) -
2 x M8 Bolts & 2 M8 Tnuts - to bolt to your profile
M8 x 40mm bolts and a nut of your choice, I chose wing nuts to be able to adjust them easily if needed. You will need one for each joint you will add to the length.
To connect to the Hue Play Bar use the included bolt in the pack.
Printed at high density (50%) to give some added strength.