1 / 6
Minimalist silicone tube holder fast — image 1
1 / 6

Minimalist silicone tube holder fast

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

silicone tube holder optimized for printing

Rating
5 / 5
Likes
44
Downloads
292
Makes
5
Views
1,417
Reviews
4

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Share Alike

Minimalist silicone tube holder. 

Print with no top or bottom layers, 1 perimeter, PLA is fine.

Designed to print with minimal material. My first attempt was a solid plate with holes, next I tried just the rings, and finally settled on rings with connected arches between them. 

With this design the machine does less hard stops so it prints faster and better than just the rings alone and it's more rigid. Looks better too.

Trying to design this and other things like it with the philosophy of: “designed for printing”

 

the rings are 50mm in diameter and fit most tubes tightly, they work well as holders as is as 10mm tall. 

To use the a taller holder, I scaled X and Y by 101% and made Z 100mm.

Printed with 0.6mm Nozzle, 1 perimeter, 0% infill, no top or bottom layers 

Designed in Sketchup 2017 because that's what I know, fixed mesh errors with 3D Builder.

Tags