Surface 3 Pro power supply case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I have a refurbed Microsoft Surface 3 Pro. , the power supply was not the OEM with the extra USB in front. I had one…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 27
- Makes
- 0
- Views
- 315
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I have a refurbed Microsoft Surface 3 Pro. , the power supply was not the OEM with the extra USB in front.
I had one of the right one, but sadly the capacitor was bad. This is not something there are impossible to repair but after that, the plastic case looks like a wreck.
I have made this new case for the supply. They are two models: the first no 1 have a slit inside the case to the screw, No 2 has more beefy surroundings around the screws.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
200
Infill:
20
Filament: Fiberlogy easy PET-G PET-G Your choice :-)
Notes:
The blue case is printet in Smartfill PLA it's nice but I have some concern about PLA for a 230V PSU. Next was printet in PET-G
Use M3 screw, and a 3M Tap for prepaire. The lids hole can be drilled up to 3mm, if too tight.Category: Electronics