Enclosure for Smart LED Tradfri driver, IKEA Hack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hack IKEA Tradfri 10W Home Smart LED driver to handle 19W in new Enclosure
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 53
- Makes
- 0
- Views
- 1,812
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
IKEA Tradfri Home Smart is a great solution for home automation.
When it came to lighting the kitchen table, IKEA's driver solution was a big grey unit of only 10W (se photo) - there simply had to be a smarter solution...
My solution (Hack) is to use the cheap 19W power supply from IKEA (see picture) and move the ZigBee control board from the grey unit to a new much smaller 3D printed box.
It requires some soldering work and a few small screws, but then you have a solution that can draw up to 19W. Since the power supply is moved to the power outlet, it's easier to stash the little box away with the ZigBee control board.
Have fun ;-)
>> If you like the model, please leave a like, a make or give it a rating… ;-)