1 / 15
CO2 Sensor Crystal
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For the CO2 sensor MH-Z19C-DZ I printed a crystal from glowing in the dark filament.
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 55
- Makes
- 0
- Views
- 593
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The electronics includes an Emakefun Nano V3 Plus, the CO2 sensor MH-Z19C-DZ, 3 Adafruit NeoPixel Diffused 8mm Through-Hole LEDs and various connectors, cables and a small PCB.
The printed crystal definitely needs to be reworked and adapted to the PCB and the position of the LEDs. After positioning the crystal, I fixed the "LED_Einsatz" to "Base_Steine" with adhesive tape. This prevents the crystal from twisting.