Counting matching models…
CLICKbase , like the Clickfinity design it evolved from, is a latching Gridfinity baseplate that holds all Gridfinity compatible bins securely without using any magnets. The most significant difference with Clickfinity (and it's other…
The Rigid Molle Panel For Custom Organization V2.0 is a remix of my model Design software: SOLIDWORKS Slicer: Prusa slicer Printer: Artillery Genius Pro Nozzle size: 0.4 Resolution: 0.20 Perimeters: 3 PEI magnetic sheet Bed Temp: 60c…
Fixed a tiny error the Ridgid tool holder model had, added another tool holder model to accommodate the belt clips some drills have (its usually better to shim out the regular size, but I wanted to print the whole thing) Also positioned…
RIDGID Tools Double 18V Battery Holder Simple battery holder for storage of your RIDGID batteries while not in use. Batteries slide in and out with ease while maintaining enough grip and stability to keep them secure. The fit is snug and…
I designed this Rigid Molle Panel For Custom Organization in SOLIDWORKS for the Printables Ropes, Cords & Straps Gear contest. Design software: SOLIDWORKS Slicer: Prusa slicer Printer: Artillery Genius Pro Nozzle size: 0.4 Resolution:…
A half-shell case for the Galaxy Tab S6 Lite. Covers the back, sides, and corners. Also provides a bezel to protect screen when device is face-down on a surface. Hard shell design: Fills-up the MK3S build space (1-2mm to spare) Prints…
This is a two-part print that provides a close-fitting shroud to replace the stock shop-vac size 2.25" dust collection system with an intake for a 4" dust collector. It requires minor assembly (epoxy or thick super glue) and minor…
I was looking for a battery holder for my 18V Ridgid tools, but what I found rely on friction or orientation for retention. So I made one that has a positive retention to use for something more mobile, like pack out cases. The fit is snug…
Parts I designed for my Ridgid Dustopper Shop Vac Cart. This lets you connect 2" PVC pipe to the wheels of the shop vac and also mount all the accessories and hoses to the cart as well. Please check out my video where I give you a tour of…
Optimized for ease of printing and assembly. The main body prints in one piece with supports to clear for the slot for the gates. Gates come in two pieces; the bottom piece can be bolted (m4) or glued on after you slot it in the gate.…
Additional insert options and reduce wall thickness to cut print material/time by over 50%. Remixed from benjamenjohnson design, https://www.thingiverse.com/thing:3371609 , Naming scheme: # upper/lower (deep/shallow)_alt "#" - Number of…
AEG/RIGID Battery Mount \ Breakout You will need a couple of M3x10 bolt and nuts if you want to use the terminals and some of these connector + wire https://www.aliexpress.com/item/1005003770642780.html Updated new -…
Not Affiliated with Ridgid. Fixes the slight wobble in the ridgid table saw fence before you clamp it down. It replaces the two white plastic parts on the bottom of the table saw. If you use it let me know! it's a work in progress. I…
This is a holder for a Ridgid 18V battery. The fit is snug and the back has a slight (5 degree) angle. It is intended to be mounted to a wall or the vertical face of a cabinet. This design has been updated to include a v2 that is looser…
Anka is a mostly 3d printed 1/10 RC Short Course Truck which is inspired and remixed from the excellent Tarmo4 project. (You may reach the Tarmo4 project's details from here .) If you are a terrible driver like me, this hobby might become…
Logos for Ridgid, Craftsman, DeWalt, and Bosch Slice with .20mm QUALITY or SPEED and you shouldn't have any problems. If you need help with inserting color changes into the slicer, let me know and I'll show you how to have PrusaSlicer do…
This is a molle panel that has holes for screws and optional spacers if you do want to mount with screws. Holes are large enough for paracord and can be mounted that way too. it also has slits if you want to mount using velcro and straps.…
This model has been remixed to fit a Ridgid NXT 2.5" hose (2.25" OD at connector) to a DeWalt Sliding Compound Miter Saw - specifically model DWS780 but it will fit other models. Chamfers have been added to the vac locking mechanism and…
RIDGID Tools Double 18V Battery Holder Double battery holder for RIDGID 18V Batteries. Simple battery holder for storage of your RIDGID batteries while not in use. This is a flat mount holder that requires external mounting screws. May…
Another tactical rigid MOLLE Panel. I add some hole in the panel to set something with paracord or mini-bungee. And a lateral fixation hole to couple more than one panel. The 4X3 fit in a Ender3 with something like 18x19cm, and for…
Battery holder for Ridgid cordless drill batteries. Fits the 18v, possibly others. May fit other battery brands as well. See included profile.
This is a rigid mount for the BTT EBB3.6 v1.2 toolhead board on the ClockWork2 / Stealthburner. The plate is supported on three points and a lot more rigid than other solutions. It was only tested on a Voron Trident. No tests currently on…
This Ridgid Tool Holder can be mirrored to face your tools to the left or to the right. I hold everything from simple little routers to ½ inch impacts, grease guns, or anything that is heave. All work just fine. I printed it with CF-PETG…
This allows adding a second 2.5 inch dust port onto my Rigid sander. This better matches the airflow requirements for my 4 inch dust collector. If you see my 4 inch PVC dust collector project I have a splitter to go from 4 inch to two 2.5…
OnePlus 13 - Ridgid Style Phone Case, the case extends past the screen and camera lenses to protect the from scuffing when places on flat surfaces. further more it has a pronounced ridge on the back for better grip. Warning can be…
Originally on Thingiverse but moved over. A few remixes still available on Thingiverse. Please do not sell these on Etsy/EBay/Facebook without arranging with me prior. I'm open to use but many people are not attributing it back and this…
Trays, dividers and labels to fit the Ridgid Pro Gear 2.0 Drawer toolbox. Should also fit Keter, Magnusson and other rebrands. You'll probably need to print the divider on the diagonal, and the trays standing up at 45 degrees with some…
This is a remix of figterk 's model to be able to use any rigid filament for those who don't have any flexible ones. I used the Gridfinity compatible model from DSwanlund for the dimensions. The bit holder fits right into the case, but…
This is a small, highly portable rigid heddle backstrap loom. Your first project can be a new backstrap, and you can use paracord, USB cable, shoelaces, or whatever you want to stand in until you have your newly woven strap. You'll need a…
I needed a phone case before the actual case arrived. I found Leo DIY's TPU case but I didn't have TPU lying around. I realized the dimensions should be similar. I just needed to cut a few notches to let the case flex enough for me to…
Update 2024-4-29: I've uploaded a pair that have minimal supports. I really don't recommend using them, as the models with the built in supports have been fine tuned over dozens of test prints to provide the best printability and most…
I lost my power switch key to my Tile/Wet Saw and decided to design one. I printed it at .2mm layer height with extra perimeters for strength. I stopped it at layer 3 for a color change and back to the main color on layer 5 so the text…
UPADED: 2023-05-07 New support settings that seem to work better. Noted below, in the picture and in the new 3mf file "Ridgid Drill-Driver bit holders-Spt v2.3mf" UPDATED: 2023-04-29 I have reworked the bit holders after someone commented…
This is a combination of my own creations and originals so I could store batteries, Tool heads and charger on the ceiling above my bench. They will also work on the wall. Allows for storage with or without batteries attached, spare…
This is a remix of DysonOBI from TeachingTech. It allows a Ridgid Battery Adapter from Amazon to be affixed to the Dyson V7 or V8 vacuum. It may fit others. You will need the following: -Ridgid AEG 18V Hyper li-ion Battery DIY Dock…
Rigid Battery Mount. Mounts to wall with screws. I printed it with PLA.
One of the biggest complaints in the woodworking shopvac world seems to be hoses, connectors and adapters. My dad wanted a set of connectors for his 2.5" setup, and this is the result. Ridgid hoses have stupid sizes. And they don't fit…
Needed some non-trip cable floor covers. Most coiled rubber covers do not lay flat, and silicone is too soft to protect cables from heavy downwards pressure e.g. electric wheelchairs. ‘Prusament Galaxy Black’ works well to hide dirt from…
Rigid shop Vac Filter nut. This is remix from Dragonman57 from Thingiverse.
Easily printable cervical vertebrae with discs. Image segmentation made in 3D slicer. Other 3D works in Grasshopper and MeshMixer Same 3D model as Flexible Spine ( https://www.printables.com/cs/model/704103-flexible-spine) but intended…
RIDGID 18V Drill Holder Upside-down Position Perfect wall mounted storage for almost any of your 18V RIDGID battery powered drills and drivers. This mount may fit other makes as well. Remixed - Removed excess holes from base plate, added…
I liked the edits on the featherboard done by r00nee, but the miter bars didn't fit in my Ridgid table saw miter slots, so I edited in order for them to fit. While I was at it, I changed the bottom of the bar to hold either 1/4-20 Hex nut…
This is a part to replace the small block that the fence uses to clip the guide fence to the saw table. And, greatly improves the repeatability of maintaining square when the fence is moved to a new dimension.
I designed some brackets to hold a work bench/plywood on top of my Ridgid pro gear drawers or large tool box. I used washers and some small drywall screws (I will add the size here later). Unfortunately, this version will not lock on top…
Modified V3 Shell to properly fit the Foxeer Wildfire Analog Module
The backplate is 2mm thick, so it won't cover the camera bump completely. Did that so it remains a bit flexible. It is kinda tight if you use very rigid materials, might be a bit brittle and hard to take off. # Print recommendations 1.…
The DF Loom is an extremely simple yet versatile version of a rigid heddle loom that can be built DIY-style at minimal cost. It uses 3D-printed parts and aluminum extrusions, which are readily available from local hardware stores. The…
Universal Impact Driver/Drill Bit Holder A universal cordless Impact Driver/Drill Bit Holder meant Instalation requires: 1 x Brand dependent screw ( check sheet below ) 2 x Neodymium Magnets 20x10x2 mm ( example ) Brand Screw Type Bosch…
Rigid NXT Shop Vacs already have a rotating coupler on the end with a locking attachment. I designed this to attach the Rigid shop vac to Dewalt DWE6421 and DWE6423 orbital sanders. This adapter has a feature that helps still utilize the…
Wanted to hang my small parts box from the side of my tool box. I have printed, tested and works well. Print 2 of them, there are other options out there, but I wanted something that was simple to print, and to keep the print minimal.…
Rigid Corner Brackets for 2020, 2040,4040 Alu-Extrusions with 6mm V-Slots. 2 different Designs: one for Corners with V-Slots on both Sides and one with V-Slots on one Side only. They are 20mm wide and 50mm long. Easy printable - just…
This is a zero clearance throat plate for Ridgid R4512 table saws. These may or may not work on R4520 saws? I believe they are the same but I do not own one to verify. Because the print is too large for most printers, it must be printed…
I picked up an older model Easy Weaver loom at a second hand shop, but it was missing quite a few pieces. They are generally made out of a wood species such as beech, which is hard to find around here. In addition, other woods hard enough…
Ridgid, Erbauer, JCB, AEG, Keter, Magnusson modular pro tool boxes ridgid pro gear case bin lid. Not compatible for use in the clear top organizer. Works best if you take the inner lining out of the lid on the 22inch tool box from system…
This model is compatible with the lego system.
UPDATE!!! I've added a new version which, when printed in TPU/FLEX material, allows you to pull the cord off without unwrapping it! Print the V3 version in flex, and the crate accessory lock in PETG! Cord Wrap for Ridgid Pro Gear system…
Includes: - Outlet Adapter 90 degree elbow to Rigid 2.5” Vacuum hose (16 Gal. 6.5-Peak HP NXT Wet/Dry Shop Vacuum) -Inlet straight adapter to 2.5" dust collection tubing with band clamp -2.5" dust collection tubing to 1.5" vacuum port…
This is an adapter to use Makita 18V batteries in AEG (Ridgid) tools. This adapter uses geniune Makita terminals pad (such as 643852 or 643838). If you don't have it - either purchase it, or print/make it yourself - see…
I realy like the design of the ProtoXtruder HGX and just gave it an additional brace on one motor mount. Its almost no added weigth but stiffens the arm a fair bit. Remix of the great work of @nhchiu:…
I like it when I see the movement of gears and filaments. So, changing the front was just decorative. The back was made tougher, perhaps unnecessarily stiff. I also changed the tolerances for the gears a little bit. This design has been…
This is a bar for Frigidaire FFTR1821 door shelf. Ours broke after 2 years so I design a replacement. It's a bit deeper to reduce the stress on the bar when storing oversized jug (in our case soy sauce). Should fit 30" fridge with the…
simple cord wrap for the side of ridgid progear system 2.0 tool boxes, medium and large. May work on others as well.
uses tool grid screws to mount to the board. printed with 80% infill with pla +
DJI Osmo Nano Lens Cap – Flexible TPU & Rigid ASA Versions (STL + Fusion 360) Description: This is a custom-designed lens protection cap for the DJI Osmo Nano. It’s available in two variants, optimized for different materials: TPU version…
PETG recommended for strength and flexibility at 20% infill with 4 perimeters. (Some petals snapped with less infill.) No supports needed. Mounts horizontal or vertical, including the underside of a shelf or on the ceiling, depending on…
This is an adapter that will allow you to connect a Black and Decker random orbit sander to a 1-¼ Ridgid shop vac hose. I modeled this to connect to my Black and Decker BDER0600 5 inch random orbit sander, but there's a good chance it…
This is a vacuum adapter for CAMLOCK that fits a RIDGID Hose. It a remix that was made to fit a RIDGID Hose, specified as the 1-7/8 in Vacuum Hose. The model has a 43.50 outside diameter, with threads, which fits snug on the hose. Made to…
This is 61mm x 40mm
Minimal, snap-on case for Pixel 9a designed for rigid PLA. Combines a 25% gyroid infill with 4 perimeters for flexibility and strength. Snaps on easily, stays on well, removes and reattaches without damage to phone or case. Prints in 1…
For large enough printer, just use the body_full and the two nob parts. For smaller printer, you will have to print the body as two parts and then connect them using 3 copies of the insert. Use glue if you want to make it permanently. For…
Remixed from another card holder to hold Semi Rigid card sleeves & Toploaders I printed a fuzzy outer edge on the top which was a nice effect On Prusa Mini print without skirt or it'll be too big
I needed a spool holder for the Rigid Ink 1kg spools as they have a larger hole (54mm) and wider body (74mm). This spool holder will hold a spool with a body up to 76mm. The Innofil/Ultimaker spools do not fit this holder, but it is as…
The original hardcase works great, but lacks a place for the stylus (S Pen). I've added a slot for the S Pen. The S Pen clips in best when oriented tip up. I've added the pen slot to both the smooth and textured version on the case. Only…
This simple design has a female end that receives the standard male hose end. I designed it so that there is no need for printed supports, and so that the print flow increases the strength of the printed model. There is also additional…
WIP Currently in test print Before anyone asks NO there is no respirator in the chin area... any model with one is wrong. Category: 3D Printing
This part allows a portable AC unit to be connected to a 5" rigid ducting pipe for external venting. My case was through a conservatory wall (UK) during a heatwave. Threaded side screws onto a 6" Portable AC Hose and the other side is…
Phone case for Moto g53 (2022). Was printed using PLA+ (didn't have any TPU at the time). If you choose to print in TPU just make sure to reduce the scaling in the slicer (doing this might require some trial and error). This is to ‘get…
This is precisely sized to snap securely on the back of the brushless driver. I recommend using PETG or PLA+ for durability and to avoid cracking due to the tight fit. The basic version will hold bits without magnets or a base. It does…
Mounts to the sides of the Ridgid pro gear modular large tool box. Presses in nicely for a firm fit or can also be screwed in. Just a basic starting point so that people can remix and design their own accessories for it. At least 2…
RIDGID - 2.0 Pro Gear System 22 in. Compact Tool and Small Parts Organizer Nesting Cups This the smallest of the Ridgid organizers. These trays divide the top half of the cups into 2,4,6 and more sections for organizing while still having…
What i changed ? antena holes are moved 1mm higher display hole is smaller side button is better protected pre-marked hole for power LED and antenna LED so if you print out of the translucent material, you will see the antenna red and the…
The plastic ratchets that came with the original Kromski Harp Rigid Heddle Loom are prone to tooth slip and deformation under load. This design replaces the original pawl and gears with slightly thicker equivalents for better alignment…
This is a Track Square I designed to work with the New 18v Ridgid Track Saw (R48630B). You will need to get some ¼-20 T-track bolts; I will link to the ones I used. I also used m3xm6 heated inserts with m3 screws to attach the bottom. And…
This aims to improve print quality at higher accelerations on The 100 based printers that have larger build volumes. While the printed parts are now actually ~0.7g lighter than the v1.1 gantry according to the slicer, and the M5 bolts…
Have a few jigs and sleds for my table saw and got tired of making them out of wood and having to fine tune them. This fits the miter bar slot in my Ridgid R4512 perfectly. Uses a 1/4x20 nut and can be secured to whatever jig you're…
Very minor supports built into the adapter. (see red in below image). This adapter is designed for the tapered suction end of my central vacuum hose. Connection diameters are as per the following image. 0.2mm layer height 0.4mm nozzle PLA…
Use the default RatRig print settings recommended in this official link here . The .stl model has the correct oriented position on the build plate. P.S. Sorry, I only had stainless steel screws and no black screws.
I designed this drill holder to hold the drill in upside-down position. Some holders clip to the wall. This one does not put any stress on the drill
I designed this adapter for my Kreg track saw for hooking it up to the Rigid 1-7/8 shop vac. I found a much better solution after that from Rockler but maybe this print will be useful to someone else. It fits the original twist lock…
I made this dust hood for the Ridgid TP13000 thickness planer, should work with the TP1300 as well as a few rebranded models. It needs one M5 screw to attach to the planer, and 4x M3 screws and nuts to assemble the halves. Includes a…
I searched far and wide for a replacement throat plate or a 3D model of a throat plate for Ridgid Saw MS1290LZA, to no avail. The model was discontinued. The old plates became brittle and broke apart. This design is much stronger and more…
I used the Triangle Labs Dragon Hotend v2.0. The hotend comes with m2.5x8 (4x) and m2.5x5 (2x) I use the m2.5x5 on the front and the m2.5x8 in the back. This is because the threads do not go all the way through the hotend so you need them…
a petg Cover for iphone 12, petg is best filament for this type of cover for iphone 12, a small and fit cover
The door bins that came in our ~20-year-old refrigerator gave out about 15 years ago. Frigidaire wants a whopping $55/ea to replace with an official Frigidaire part. But I am a 3D Printer! This design doesn't quite mimic the appearance of…
I had a sturdy result with the following settings: Nozzle: 0.6 Layers: 4 Infill 25% Mateial: PETG Supports: required I suggest printing the model facing down with a 45° angel. There is each a long and short version. Short or long…
Ridgid Track Saw Arbor Cover I designed because I couldn't be bothered to spend 10 dollars on one that was 3d printed. Should work pretty well just make sure that you match up the smaller and bigger angled sides because it does matter. If…
This is my cordless tool hanger for my Rigid 18v power tools, I refined this over many iterations to fit both old and new Rigid tools, they have changed a bit over the years, these are strong, use minimal plastic and have a screw hole…
This is a replacement shelf for a Frigidaire 241691311 refrigerator. It goes on the upper section of the door. The shelves that come with this refrigerator are an extremely poor design, and break almost immediately if you put any weight…
This is the inverse of a battery mount. It will allow tools to be mounted. I made this specifically for a low-profile option to hang my inverter. Printed vertically so no supports would be needed. 20% infill 0.2 layers
Description This is a rigid travel case designed for the ZSA Voyager keyboard. Magnets secure the keyboard inside the case and also serve as the locking mechanism. The case’s hinge is formed from M4 screws and heat-set inserts. A key…
