1 / 1
Laptop behind monitor mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds laptop piggybacked behind a monitor, with the laptop screen open. Requires VESA mount.
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 82
- Makes
- 0
- Views
- 3,814
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
- for use with a VESA pattern monitor
- in my case I needed to mount my laptop behind a monitor with the laptop's screen exposed as an addition monitor
- the monitor was an HP L2245WG (22", I think) which had its own stock monitor stand I needed to work around
- I don't think I have any pictures of it in real life, but it worked fine in PLA & was plenty strong - similar pictured attached
- uses M4 hardware to piggyback to the monitor, M4 x 30 mm IIRC
- adjustable arms compensate for thicker or thinner laptops (I used it with a Dell Precision 7540, which is fairly thick)
- I used a piece of cardboard to avoid marking up the trackpad & triggering the keyboard
- vertical adjustment features to allow laptop screen to be positioned wherever you like relative to the center of the VESA mount - logically so that the bezel of both screens line up
- I was going to improve the design & CAD, but gave up because I have better things to do now
2024-01-28 rev 7 assembly instructions
Here is a view of the assembly, only one side:
- I was too lazy to mirror the components
- note that I'm pretty sure I never tested, let alone printed rev 7 parts
- when you print the parts, you'll have to mirror 2 of the 3 unique parts, the HOOK & the ARM

All the hardware is M4:
- I put down qty 3 nylock nuts
- qty 2 for adjusting the HOOK in its slot relative to the ARM in order to accommodate laptops of different thickness
- I used a piece of cardboard on the keyboard side to mitigate damage to the keys

- qty 1 to lock the ARM vertical adjustment relative to the MOUNT

- the idea behind rev 7 was to reduce the fastener count on this joint by leveraging the edge which already existed as a sort of sliding rabbet joint
- qty 2 for adjusting the HOOK in its slot relative to the ARM in order to accommodate laptops of different thickness
MOUNT
- The mount has a square hole pattern for a VESA 100 x 100 mm mount, also using M4 hardware IIRC
- the corner holes are reserved for that purpose
- the holes in the vertical row are for fine tuning the adjustment of the ARM up & down to position the laptop screen wherever you'd like within reason

- The reason why it's a U shape is because my monitor at the time was some HP L224G monitor or something & I wanted this stand to work with the existing desk stand that came with the monitor
- Therefore, I needed this U shape to reach around that stand to utilize both simultaneously
- If you had a generic VESA stand, this part might still work
