LED track and diffuser for printer enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.46 – €0.57 net (excluding VAT)
For file: Back diffusers_0.2mm_PETG_MK3S_36m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.51 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 36 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Get nice, clean and bright illumination of your printer's enclosure with this track & diffuser system.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 19
- Makes
- 0
- Views
- 247
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I've made this LED track and diffuser for my printer enclosure (which I also designed, built out of wood, and could share the model for if some folks are interested)
I've printed the rails, corners and front with opaque white PETG, and the diffusers with a less opaque white PETG (but not fully transparent because I found that it wasn't diffusing the light enough).
I've used 24V, 6000K, 2400lm dimmable LED strips (link), L shape connectors (link), and a touch button for on/off and dimming control (link)
The whole thing is held by 7 wood screws, and the covers for the front just slide in. Note that because of that, you do need a bit of space on either side, within your printer's enclosure, to be able to close it.
I've included the Fusion360 file so you can modify the design to suit your needs (different LED strip length, different button, etc).