Gas Metering Device - Housing for PCB
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A housing for a device to measure gas consumption. Compatible in an Homematic environment.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 22
- Makes
- 0
- Views
- 333
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Introduction
This is a housing for a gas metering electronics device. It can be used together with Gas Metering Device - Sensor Housing for Reed Switch.
Printing
The gcodes are ready to print.
If you use the STL files I recommend to add a cylinder volume in the slicer program for both stands of the lid. Use height of 9mm.
Use 3 perimeters.
Printed in PLA.
Change it to your needs
Don't hesitate to change the housing to your needs. An OpenSCAD file has been attached.
Home automation
The sensor can be connected to various home automation devices, I plan to use it in an Homematic environment, see Gas Metering.
Disclaimer
Use the housing on your own risk.