E3d Revo Six and E3d V6 models
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
E3d Revo Six and E3d V6 models for display and (somewhat +/- 1mm) accurate .stl files
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 99
- Makes
- 2
- Views
- 1,254
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Haptic Models
- License
- Creative Commons — Attribution — Share Alike
I created these models for display/educational reasons.
The measurements were taken from official e3d sources and/or from measurements I took myself. I simplified some parts to ease printing.
The foldered .stl files are to 100% scale. To ease printing I recommend to scale them up to 200% and print with a 0.4mm nozzle at 0.1mm layers. The spring of the revo model is very delicate but can be printed. Here I recommend using a 0.25mm nozzle at 0.1mm layers. I do NOT recommend to use any further support material other than the one I provided since its residue can interfere with the printed threads.
I prepared the two hotends in the cut version a s shown in the picture. These parts require some glue to be assembled. I used clear model builder glue.
To help to distinguish the single components I suggest to use different colored filament.
Thanks to Olafejs for creating this wonderful stand! it works perfectly with both 200% scale models. https://www.printables.com/model/136247-e3d-v6-model-stand