1 / 5
ETC Response Midi SMPTE Gateway Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mount for the ETC line of Response Midi / SMPTE Gateway. You will need 2 to mount the device. It can be…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 247
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a mount for the ETC line of Response Midi / SMPTE Gateway.
You will need 2 to mount the device. It can be screwed down or use a couple of tie wraps to mount to a single space, rack mount filler plate.
Just remove the 4 rubber pads in the extrusion and snap 1 mount onto each end.
Print Settings
Printer Brand:
Ultimaker
Printer:
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
1.5
Infill:
20%
Filament: Gizmodorks PETG BLACK
Category: Electronics