PVC Multi Use Bracket Assembly
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Thank you for viewing my designs. Please pay it forward and continue the opensource way of life. Please remix this and…
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 48
- Makes
- 0
- Views
- 399
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
Thank you for viewing my designs. Please pay it forward and continue the opensource way of life. Please remix this and innovate.
This is a down and dirty fastener for any thin material like cardboard to make an enclosure.
The Bracket, Pin, and clip will slide onto a 1/2" PVC pipe to provide a mounting surface for a material like plastic cardboard or clear plastic greenhouse sheeting.
Originally designed for a PVC pipe 3D printer enclosure using 1/2" PVC pipe and 3way corner fittings to make an enclosure frame for your 3D printer or small plant greenhouses. Use this bracket system to attach side walls and roof to keep the heat stable for 3D printing or protecting plants in colder climates.
For 3D printing I added the filament guide parts and the Solidworks files for remixing.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3 MMU 2
Rafts:
No
Supports:
No
Resolution:
.15
Infill:
solid is best
Filament: Hatchbox PLA or ABS any
Notes:
Add brims for stability and adhesion support on the parts if printing tall profiles.
PVC pipe bracket for printer enclosuer wall
No supports should be needed.
Designed in solidworks 2019
This is designed in Standard SAE inch system. Everything can print without supports. Some people might prefer to brim the pin and bracket, but it shouldn't be needed. Printing the pin in high res and possibly a little slow will help.
If possible, increase the hole tolerance for a tighter fit.
Category: 3D Printing