Raspberry Pi 4B With Camera Slot, 40mm Fan, Well Vented Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Remix to Michael Kellsy "mkellsy" original Raspberry Pi 4B case design which he did a great job. My…
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 48
- Makes
- 1
- Views
- 391
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Remix to Michael Kellsy "mkellsy" original Raspberry Pi 4B case design which he did a great job. My rendition modifies the top of the case to have slotted vents instead of the honeycomb design "the honeycomb can be a pain to print correctly". Using a 40mm case fan "will be needed to be mounted on the outside". I also added the camera slot for the ribbon cable that was missing on the original. I have also modified the bottom of the 8020 case. Again added the slotted vents instead of the honeycomb design.
The original can be found here: https://www.thingiverse.com/thing:3793664
04-19-2020 Update: I have added 75mm VESA vented base & modified the top of the case for max cooling with side vents with a port on top to see the status LED on the Pi board.
You can also use whichever fan grill you like. I have not included the fan grill, because I did not designed it. But if you would like to get it from the designer Prot0typ1cal, He did an amazing job you can get it here: https://www.thingiverse.com/thing:1750976
I'd recommend using either the Noctua NF-A4x10 5V Version Fan (40x40x10mm) or Noctua NF-A4x20 5V Version Fan (40x40x20). The only difference is the height 10 vs 20 mm and the 20mm RPM is a little faster. Both are very quiet & Noctua fans are built to last. As a reference the fan in the picture is the 40x40x20.
Note to content creators (YouTube, Patreon, Educators, etc). Yes I understate that you are "technically" getting paid in the backend for creating content & thank you for creating that content. So to expand everyone's knowledge, you have permission to use this design in your content as long as you: State that it is not yours & acknowledge who designed it. Provide a link to where you got it from, so others can download & enjoy it as well.
BTW if you like my design, please don't forget the click the "like" button & show you appreciation.
Thanks & Enjoy!
Print Settings
Printer Brand:
TEVO
Printer:
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
20% or better
Filament: Your Choice PLA Your Choice
Notes:
I printed it on blue painter's tape that I prepped with isopropyl alcohol to remove the wax film. Using 3D Solutech PLA black filament the initial bed temp was 60C, nozzle temp 205, no cooling fan, & print slow on the first layer (I had it at 25). On the 2nd layer to finish drop to bed temp 50C, nozzle temp 205, cooling fan high, & increase print speed back to normal.
Category: 3D Printer Accessories