1 / 2
Door Stop for the Original Prusa Enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple door stop for the original prusa enclosure.
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 74
- Makes
- 6
- Views
- 549
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
A very simple part I created to act as a door stop for the Original Prusa Enclosure. Attach the part as pictured to the frame using an M3x8mm bolt. Tighten the bolt just enough until friction will allow the part to turn and stay in place in any orientation.
When vertical the part will allow the door to open and close without hindrance, when turned outwards away from the frame it will gently hold the door open.
Quick and easy print that only takes 10-15 minutes. Pictured was printed in PETG with a 0.6mm nozzle with standard 0.40mm draft settings.