1 / 8
MMU2S / MMU3 Original Prusa Enclosure PTFE Tube holder — image 1
1 / 8

MMU2S / MMU3 Original Prusa Enclosure PTFE Tube holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

PTFE tube holder designed for the Original Prusa Enclosure. It holds 5 tubes using PC4-M10 fittings.

Rating
5 / 5
Likes
38
Downloads
134
Makes
1
Views
1,462
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution

This is a simple ptfe tube holder designed for the Original Prusa Enclosure. It holds 5 tubes using the PC4-M10 passthrough PTFE fittings (I used 10 of those). The holes aren't threaded but the fittings will screw on nicely.

You need longer tubes than the ones provided with the MMU2S if you want to use the side opening on the back of the enclosure. I also used the short tubes of the MMU2S filament buffer.

It is compatible with the hinged top :)

You need 2x M3x8 screws (should have plenty spares) to fix it to the enclosure frame.

Printed without supports, using Prusament PLA.

Enjoy!

Tags