Screen mount (jointed, pivoting) for Ender 3 V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I've placed my printer on top of a closet, and wanted to be able to see the screen from below. This solution utilizes…
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 66
- Makes
- 0
- Views
- 677
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I've placed my printer on top of a closet, and wanted to be able to see the screen from below. This solution utilizes the original mounting bracket and t-nuts. The screen can still be oriented upwards (in the original position) if you'd like.
I've added a pattern on the contacting surfaces to get some resistance and prevent unwanted rotation. Turning is still smooth but “clicks” into the pattern. This works well when I use a spring washer. The tension is easily adjusted with the wing nuts.
Axis holes are adapted for M6 bolts, which is a bit more than needed but this was what I had laying around.
Worth noting:
You need to loosen the cover to the motherboard and rout the display wire to the front to get some extra reach. It's not pretty, but it works.
Hardware needed:
3x M4x20(or longer)
3x M4 nuts
2x M6x30
2x M6 wing nuts
2x M6 washer
2x M6 spring washer
Original hardware with t-nuts
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
15%
Filament:
No name PLA
Notes:
I’ve tried to model the parts to prevent the need for support, but you might want to use some in the frame mounting plate for the bolt hole, depending on your printer.
Category: 3D Printer Parts