1 / 2
Simple Massage Roller
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple massage roller using off the shelf hardware and tool-free assembly. No supports!
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 69
- Makes
- 0
- Views
- 633
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple roller massager using off the shelf hardware and 608 bearings. Print in PETG or PLA, example is Monoprice Black PLA+ and IEMAI Grape PETG.
Everything prints well with a 0.4mm nozzle and 0.2mm layer height. I suggest printing everything but the roller together with 5 walls and 2mm gyroid infill. Print the roller with 3 walls and 4mm gyroid infill.
Need the following to make:
- 1 x Bumped_Roller
- 1 x Roller_Arm
- 1 x Roller_Handle
- 1 x Nut_Cap_Nylok
- 2 x Roller_Spacer
- 2 x 608 bearing
- 1 x Bolt 5/16 x 3/4"
- 1 x Bolt 5/16 x 3.5"
- 2 x Nylock 5/16