Bambu Lab FAST print reusable Spool
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.00 – €6.11 net (excluding VAT)
For file: NarrowSpoke_0.2mm_PLA_MK3S_5h17m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.55 excluding VAT (range midpoint).
- Weight reported by the author
- 75 g
- Print time reported by the author
- 5.29 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
5 h instead of 7 hours native fusion files blank model to change
- Rating
- 4.417 / 5
- Likes
- 106
- Downloads
- 1,348
- Makes
- 17
- Views
- 5,684
- Reviews
- 12
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Works with original spool.
I always have trouble printing hex designs. So i did a spoke design. This has much less retractions. During design I saw that it reduces print time if you only have one center hole so its done this way.
original model takes 7.7 hours. this model only 5.2hours.
I added a plain spool if you want to do changes by yourself.