Roller blind spring retainer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement retainer for the spring-loaded fitting doodad on a roller blind
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 72
- Makes
- 0
- Views
- 645
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
The retainer cap of my roller blind broke - the part that holds the spring-loaded side in place. This is a model of the part, with dimensions taken from the original. It's a basic cheap no-name blind, but I would imagine this will fit a number of brands.
It should be a fairly tight press-fit into the blind tube, but the part with the spring should slide freely - some light sanding might be necessary to remove any printing artefacts.
Should be printed in the orientation of the STL, with supports on build plate only. There is a screenshot of my slicer showing the correct orientation.
In the photo, it is the black part (I am out of white ABS).
Print info
Printed perfectly in ABS+ with the standard Voron settings, but should be OK in any material, so long as the orientation is correct - if printed sitting on the flat side, the layers will likely be split apart by the compressed spring within and it'll fail in the same way as the original part.