Rugged Box for Drill Handle and Collets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rugged Box style case for Drill Holder and Collets
- Rating
- 5 / 5
- Likes
- 155
- Downloads
- 525
- Makes
- 10
- Views
- 10,646
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The case is based on my parameterizable “Rugged Box” and fits Sisul's Drill Handle and up to 16 collets.
Also have a look at my remixed collets.
Support my work
For non-Prusa parts and filaments, check out 3DJake (International, UK, Germany, France).
I'll get a small cut of any order you fulfil using these links (at no additional cost for you 😉).
If you want to support my work directly, you can buy me a coffee.
If you want to order a Prusa printer and earn some Prusameters (I will also get some), you can use my referral code "@Whity" at checkout or click one of the following links
(the code only works for the first order of each printer model):
| CORE One | CORE One Kit | MK4 | MK4 Kit | MINI+ | MINI+ Kit | XL | SL1S | SL1S+CW1S |
Also check out my other models.
Assembly
You will need six M3x30 screws to assemble it.
Cut a piece a foam (~10 mm thick) for the lid to hold down everything nicely when closed.
Screws
I like these screws which have a nice round head:
Allen hex socket button head screw
Or, if you want no screw head at all, which I personally like even more:
Hex socket set screws
Note: I recommend the stainless steel ones. The blackened ones are oily and have to be cleaned.