Counting matching models…
I used the realy nice parametric rugged box model from @Whity to create a box to contain my router collets of my Triton TRA001 router. I now have a beautiful case to safeguard them in my tools drawers. The inprint on the lid makes it…
--------------- Funktion -------------------- Function ------------ Der rote Drehknopf ist mit einer M6x20 Schraube von unten locker mit der Aussenhülle verschraubt, das grüne Innenteil ist Formschlüssig mit dem roten Drehknopf verbunden…
Designed to fit these collets . The square hole at the bottom serves as both a way to hang the handle and as access for a screwdriver or other tool to help pop out stuck collets. Printed in PETG at 0.25mm layer height and 3 perimeters.…
The collet holder is for these collets . The handle holder is for this handle . Which go together, so it all works out! :) Printed in PLA. The handle holder needs supports, and the part that is inserted into the handle may need to be…
This model(set) is for those who want to connect, firmly but detachable, something round between 1 and 16 mm diameter to their print. A collet then is a good option. have an ER25 collar holder and nut system but in their collet collection…
Collet holder for 9, 12 , 15 or 18 collets of type ER16, ER20 or ER25. Please see 3D model for details. 9, 12 , 15 or 18 collets can be stored. No dirt collects in the recesses as it falls out at the bottom or rear.…
Holds 15 collets in 3x5 arrangement. Compact footprint. Outer dimensions of 156.0 mm L x 94.0 mm W x 43.0 mm T Trays can be stacked on top of each other. Print standing up, with supports (for the stack insert on the bottom). More info at…
Looking for a reliable and efficient way to store your bullet puller die and other accessories? Check out this custom-designed rack, perfect for anyone needing to keep their tools organized. It's made to hold any 7/8" threaded bullet…
An CARVERA (by MAKERA) accessories holder V2 - added 3mm collet and
I printed these out of PETG with 10 inner and outer walls at 40% infill on a Prusa mk4. A few varying sizes for 2.5in and 3in pipe with different inlet holes.
Prusa XL top filament feeder
An improved XL side sensor to accept larger collets. My original sensor had a collet break so the PTFE tube kept falling out, and the Amazon collets I ordered were much larger, so I decided to enlarge the holes in the sensor and use the…
I printed the collets in ABS, 0.12 layer with a 2mm wall thickness and 80% infill, and with support mainly because I am new at this sort of thing and something of a Luddite. I have used the ¼ and 3/8 collets and they work well but light…
I used the realy nice parametric rugged box model from @Whity to create a box to contain my router collets of my Triton TRA001 router. I now have a beautiful case to safeguard them in my tools drawers. The inprint on the lid makes it…
Designed in Rhino3d, printed on a Bambu X1C on the new supertack plate. printed in PETG-HF with 10% infill and 3 walls. Inch tray took aprox. 7.5 hrs and 3.5 hrs for the lid Metric tray took 6.5 hrs and 3.7 hrs for the lid (a little…
An organizer box for R8 collets for a Bridgeport (or compatible) mill. I've used this one now for several years and it works great. I printed this from (IIRC) Atomic Filament Silver PETG for the base and Atomic Filament Aqua Translucent…
I frequently change between MMU use and special materials, or different spool sizes in single mode use (with larger spool holder on the side). With this splitter I just activate / deactivate the MMU3 in the printer menu, and can feed via…
Collets for M3-M12 taps. The collets have been developed for the Parkside tapping set and a collet for 1/8". Spannzangen für M3-M12-Gewindebohrer. Die Spannzangen sind für den Parkside-Gewindeschneidsatz und eine Spannzange für 1/8"…
I wanted to maintain the ability to use the right-hand panel loading path on my Core One despite using an MMU for most prints. My goal was to maintain as much of the stock Bowden-tube geometry as possible, keeping my addition low-profile…
Organize your CNC collets in drawers or desk with gridfinity bins. This bins have holes for 6x3mm magnets. The top bins surface is 5 degrees tilted. 3 types of bins: ER16 collets PG10 collets. General bin to store anythings you want If…
Core One MMU3 Y-Splitter using E3D V6 Collets, mountable on the Swing Arm. There is also a Y-Splitter with Bowden collets available if no E3D V6 collets are available. Changes 27. October 2025: Removed old files (obsolete), added step…
Some 1x1 Gridfinity holders and a wooden tray for holding them The Fusion file for the tray has a couple of set ups to start from. I broke a 1/4" router bit by taking too deep a cut with the setup that uses it. Prints were on an Ender 3 -…
This is a remix of a remix (Original Clough42 converted to Schmitzna collet guided tungsten without a vacuum port). I have a WP-20 torch and wanted this design to use the smaller 0.154" Diameter collets (vs Schmitzna larger .22" OD…
This will only fit cjbaar's MMU-12x. It cannot be used with Prusa's MMU's, Ultimulti etc. Have Fun!
CORE One PTFE Y-Splitter using Bowden Collets , mountable on the Swing Arm with cable brackets or velcros. This is a remix of my Y-Splitter with E3D V6 collets. This Y-Splitter is intended to be used when a MMU3 is mounted on the Core One…
Made this collet holder that holds the collets inside of the box they came in instead of requiring you to take them out, my box dimensions are 22x22mm
I made this for my dad machine shop, so he never loses his ZZ collets or spend time looking for them. Think I did a such a great job at modeling it. I want to share the files with you guys for free and yes you can print it with a Bambu…
Collets organizer which I use for the DeWalt trimm router DCW600. This organizer fits exactly into the TSTAK carrying case. A piece of foam must be glued to the carrying case lid, so that the collets do not fall out of place in the closed…
Since the original collets break easily due to the way they are printed I came up with a design that is both easier to print and stronger. Currently there are only versions for a 3mm, 4mm and 5mm drill which I designed as a test in…
Remixed to hold 20 ER32 collets with a internal divider. Designed to be as compact as possible and fit on 220mm x 220mm print bed. There is a print file for the lettering but I didn’t use it in the end so cannot say if it will fit…
--------------- Funktion -------------------- Function ------------ Der rote Drehknopf ist mit einer M6x20 Schraube von unten locker mit der Aussenhülle verschraubt, das grüne Innenteil ist Formschlüssig mit dem roten Drehknopf verbunden…
This prevents the collets from spreading everywhere in the box, and makes it easier to find the one you need. A shaft can be inserted for checking the size without taking the out collet. This uses 12 3x0.9 magnets (each pair mounted back…
I found the default collets (miniVICE-x-series_collets__small.stl) to be too short for the bases of the minis I was using. This crude mod just adds 3mm (~1/8") to allow for thicker bases. They're still fully compatible with the X-series…
This is a drill stop that uses ER-11 collets. No fiddling with set screws, this one can be finger tightened. An ER-11 metric collet set (from 1.0 to 7.0 mm) will fit Imperial drills from a number 59 at the smallest to a 9/32" at the…
ER32 collet set - 3D Printed! I aim to use these for light duty work holding in shaped collet holders (also 3D printed!). For example: grinding a hex on a rod. Modelled in PTC Creo 3.0 I created the first part (8mm ID) manually, and then…
We used this holder for our CNC Router at Stockholm Makerspace , to hold all the different collet sizes we use. It can be used either as a desk stand or wall mounted with two screws. The AMB / Kress Collets are very hard to remove from…
Source code is included. Its not perfect but its adjustable enough you should be able to make it suit your needs. Print Settings Rafts: No Supports: No Category: Tool Holders & Boxes
A simple desktop tray to organize your desktop CNC bits and other items. There are 50 1/8 inch slots, 30 1/4 inch slots and 15 holes to hold your ER11 collets. There's also slots to hold your collet wrenches and a tray for miscellaneous…
NOTE: There is now a version of this for the Kobalt trim router's wrench(es) and collet-nut set —plus some gratuitous plasma cutting thrown in too! Click here . Prints without supports. See pics or video for the tiny screw I used in the…
A set of modified collets for Sisul 's Drill Handle . Closed back to prevent drills from slipping further into the handle Sizes from 1.0 to 8.0 mm in 0.5 mm steps Fusion 360 file available for download To get all the details of the collet…
The case is based on my parameterizable “ Rugged Box ” and fits Sisul 's Drill Handle and up to 16 collets. Also have a look at my remixed collets . Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK…
Simple holder for Proxxon collets and chuck based on templates by Zack Freedman.
I Remixed the Y-Splitter to use the Bowden Collets leftover from my ERCF build. I Printed this one on my Voron 2.4 (Still Waiting on the X-1) in KVP ABS with the single end on the build surface. I did use painted support on the interior…
Ender 3 Neo has an all-metal extruder coupling (not threaded). This is a replacement collet. Remixed for tighter grip. The inside ‘teeth’ are more pronounced, and seem to keep the PTFE tube even in the absence of metal blades inside.…
I have the Eastwood tungsten grinder, but it only has two angles for two different tungsten sizes so I printed the Clough42 design. I bought the set screws, drilled them, but with my Imperial drill bits the fit to the tungsten was not…
I hated how difficult it was to load straight walled cases like 44, 38, and 357 and I kept trying to lose the included collets. So, I designed collets with a beveled mouth that I can re-print whenever I inevitably lose or break one. I…
I needed additional collets for the Jura by GRS inside ring holder because I drill into them a lot and abuse them mercilessly. This way I can print new single ones without having to buy a whole new set each time to get the ONE I generally…
The only change was to remove the magnet holes on the bottom of the part since I don't use them.
A quick print that holds ER11 collets via magnets. No support needed. Uses 10mm x 3mm magnets.
Designed so that it doesn't collect dust in the corners or holes. Nice and simple, relatively lightweight print, low footprint. Easy to mount, easy to grab, easy to print. Designed to print without supports, just regular old settings for…
Here's my version for cnc collets,.After wasting filament making a box with the holes for the collets in it and getting the size wrong, I remade it with an insert to hold the collets. Also had a lot of difficulty getting the lid on and…
Designed to fit these collets . The square hole at the bottom serves as both a way to hang the handle and as access for a screwdriver or other tool to help pop out stuck collets. Printed in PETG at 0.25mm layer height and 3 perimeters.…
The collet holder is for these collets . The handle holder is for this handle . Which go together, so it all works out! :) Printed in PLA. The handle holder needs supports, and the part that is inserted into the handle may need to be…
Pin Vise for ER11 Collets If you have one of the popular 3018 Tabletop CNC mills, you probably have a set of ER11 collets for it. A typical set has collets from 1.0 to 7.0 mm in 0.5 mm increments, plus a 3.125 collet specifically for 1/8"…
A set of muzzles for the Indra that have extra collets instead of screws to keep the barrel in place. This uses the standard collet screw/nut. If you wish to print and sell this item, please contact me for licensing. I can be reached on…
Wall rack for storing 44 x 5C Collets. Features; Angles the collets 5 degrees to ensure easy access and no chance a collet falls out. Simple design to be printed without supports Printed inserts protect the collet from touching wood,…
Remix of the MMU3 UltiMulti COLLET HOLDER C7 designed to accommodate larger collets, which are more readily available on AliExpress and Amazon. The in the orignal model used collets from e3d are smaller and therefore not compatible. Happy…
Made specifically for this 10 collet set with 4.15mm in outer diameter https://www.aliexpress.com/item/1005007172133278.html Update: Previously I mentioned I bought them for the ArgoFile Artima AT . Unfortunately that didn't work so well,…
