1 / 3
Fixed PTFE Coupler for Bambu Lab P1P / P1S (PC4-M10)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple replacement for the original PTFE tube coupler on the P1P, it is fixed and does not rotate.
- Rating
- 5 / 5
- Likes
- 172
- Downloads
- 741
- Makes
- 4
- Views
- 6,918
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Replaces the rotating coupler with a fixed one - if you intend to mount you spool holder on the side of the printer, you might be printing the Side Filament Guide Arm for P1P instead
BOM
- 2 x original screws for PTFE coupler
- 2 x PC4-M10 connectors (Amazon Affiliate Link)
Assembly:
- print both pieces, the Adapter Core needs to be printed with the minimum possible layer height for a smooth surface
- insert the Adapter Core into one of the connectors and attach it to the other one, it should fit snug without much wiggle - if it is too small or too big, scale the model by a few percent
- separate the 2 pieces again and put them into both ends of the Coupler
- attach 2 PTFE-Tubes on either end and test, if the Filament slides through smoothly
- if everything works, remove the pieces again, add a small amount of glue to the internal hex shape and insert the connectors again
- install it onto your printer with the original screws