5 Kg Spool Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy to print, large framed spool holder for big rolls.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 139
- Makes
- 1
- Views
- 1,036
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my original design from Cults that I am posting here.
2021/02/12 - Designed a stand to let me use a 5 kg spool. Now, I printed this on an Ender 6, with a 290mm*290mm build plate. It will not fit on an Ender 5 or 3's 235*235.
You'll need to print two of each file. In addition, it is designed to use 4 M5*12 screws and nuts to hold it together. I use a ~8" * 1/2" electrical conduit to hold the spool up. (I intended to use 3/4", but neglected OD when designing. 3/4" wood dowel should work, channel is 20mm wide.
Spool in picture is 160mm wide and 300mm in diameter. Stand has clearance in both dimensions if your roll is a bit bigger.
2023/02/15 - Last week, someone at work came into the area where I use this for myself and asked if I could do something similar for a roll of labels for a printer somewhere else in the building. The short strut was born of this request, it narrows the inner width to 5", you'll need a rod/dowel just under 6", same hardware.