3030 400mm led light holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I created a 400mm long led light holder for 3030 extrusions to use for my ratrig v-core-3 500.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 65
- Makes
- 0
- Views
- 669
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I was looking for a way to mount leds to light up my build volume, so here's a led holder with M5 bolt-holes and a diffuser which connects to the led holder with 2,5mm strips.
The diffuser should be printed in clear PETG with 100% rectilinear infill, while the holder should be printed in black. I used ASA for this.
Since I made these for my ratrig v-core-3 500, here is my exert from printer.cfg in the user overrides section:
[output_pin LED_pin]
pin: PB10
pwm: True
value: 0
cycle_time: 0.010PB10 on the BTT Octopus is a 24V heater-connection, seeing as I have 24V led-strips, YMMV.
Here's a picture of an old print under the led lights:
(https://www.printables.com/model/2216-alien-xenomorph-full-figure-25-cm)