20 minute Halvklart LED transformable mount for Prusa Mini
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A holder in which the light rises with the hot end and the direction of the light is reversed. There is a tripod adapter
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 17
- Makes
- 1
- Views
- 372
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Minimalist IKEA Halvklart LED mount for Prusa Mini. Printing time from 20 to 30 minutes depending on the settings. No additional fasteners are required, you just need to remove the protection from the adhesive layer of the lamp and stick it to the printed part. Further, the lamp is fixed as a latch on the X-axis motor.
The peculiarity of this design is that the light is directed to the print area and rises along with the hot end. In addition, you can change the direction of the light in an instant (if you need to light something near the printer).
You can also print a connector adapter and mount the light on a standard tripod screw (only an M6 nut is required and it can also be printed).