Spoke magnet speed sensor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spoke magnet speed sensor for ebikes (Shimano, Bosch, etc)
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 89
- Makes
- 1
- Views
- 621
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
I have another set of wheels for one of the ebikes and needed a spoke magnet for the speed sensor, initially I wanted to purchase one but it seems that they're like 10euros!!! Which is way too much for 1 lousy magnet.
Dimensions are similar to the one from Shimano, it is a bit thicker since the original one is made of metal.
Needed
1 - neodium 10 x 4 mm magnet (can be thicker)
1 - M5 10mm screw
cyanoacrylate or other type of glue
Print settings
Material: PETG/PLA
Resolution: 0.10 mm (so the thread is OK)
Perimeters: 3
Infill: 100%
Assembly
Add a drop of cyanoacrylate and push the magnet in.
Make sure you thread the screw several times before mounting on the bikes so it “bites” properly on the printed thread.