Fanatec CSL Pedal Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapts Fanatec CSL pedal back mount spacing to standard Fanatec 275mm spacing (CSL Elite / CSR v3).
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 97
- Makes
- 0
- Views
- 1,753
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
If you have Fanatec CSL pedals you probably noticed issues with mounting the back of the pedals to sim racing rig pedal plates. The mounting spacing on the back of the pedals won't match standard Fanatec mounting (275mm) or even Logitech or Thrustmaster standards. This plate adapter will let you mount the back of CSL pedals to 278mm spacing.
BOM:
- 2 or 3x (brake, throttle and clutch) M5 flat head screws (at least 12mm long), washer and nuts (preferably nylon locking nuts), to mount pedals to the adapter plate. Plate holes are counter sunk on the bottom and flat head screws will sit flush between adapter plate and rig pedal plate.
- 4x M8 screws, washers and nuts (preferably nylon locking nuts) to mount adapter plate to rig pedal plate. Screw lengths will depend on the thickness of your rig pedal plate. 12mm or longer should work fine.
I printed it in ABS with 4 perimeters, 5 solid top/bottom layers, 50% infill, but PLA and PETG should also work, just make sure to keep perimeters and solid layer count high.