1 / 5
LowRider2 - Case for SKR or RAMPS board — image 1
1 / 5

LowRider2 - Case for SKR or RAMPS board

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a case designed to attach to the Y-plate on the LowRider2 CNC.

Rating
0 / 5
Likes
5
Downloads
53
Makes
0
Views
914
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a case designed to attach to the Y-plate on the LowRider2 CNC. It fits to the 4 screws on the upper and lower corners of the Y-plate.
In this Version i wanted to integrate a bigtreetech skr1.3 board and also a dc converter as you can see on the photos.
The holes are ready for gx16 connectors and there are also slots for the usb, sd card and wifi adapter of the skr board.

If you do not need all of the gx16 holes then you can use the cover which i added to the print files.

On the cover there are holes prepared for a 120mm and 80mm ventilator. Depending on the fitting of your skr board you can mount the ventilator inside or outside on the case.
If you have driver installed maybe you have to place the ventilator outside.

Print instructions

I printed all this files in PETG at a layer height of 0.3mm with a 0.4mm nozzle on a Prusa i3MK3s printer. No brim and no skirt because the size of the case.

The case is almost 250mm in size. So you have to watch out for the print bed temperature because of warping.
I think printing in PLA is also working so the probability of warping would be much lower.

The .gcode file is sliced with Prusa Slicer and Generic PETG filament. 4 perimeter and 3 layer at top and bottom.

Tags