LM2596 StepDown Case With JST plugins

I wanted to add RGB lighting to my housing where the printer is located. 

I had RGB and wanted to use them, but RGB works on 5V, so I installed the StepDown module and added a JST plug to make it more practical.

I take power directly from the 24V printer.

Controls LEDs via Raspberry PI Gipo and Octoprint plugin WS281x LED Status

The material I used:

LM2596:  https://www.amazon.de/AZDelivery-LM2596S-Netzteil-Adapter-Arduino/dp/B07DP3JX2X/ref=sr_1_4?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=2NWQQFRMKWYIQ&keywords=lm2596&qid=1679596076&sprefix=lm259%2Caps%2C394&sr=8-4

RGB Strip: WS2812B CHINLY 5m 300leds DC5V einzeln adressierbaren LED-Streifen 5050 RGB SMD 300 Pixel Traumfarbe Wasserdichte IP65 PCB Schwarz : Amazon.de: Beleuchtung

JST Plug: GTIWUNG 550 Stück 2,54mm JST Stecker Kit, JST-XH Adapter, 2,54mm Pitch Weiblich Pin Header, JST 2/3/4/5 Pin Gehäuse JST Adapter Kabel Stecker Buchse Männlich und Weiblich: Amazon.de: Elektronik & Foto

Sourcing map: sourcing map 120Stk. Messing Rändelmutter Innengewinde Einbettung Mutter M3 x 4mm L x 5mm Außendmr. : Amazon.de: Baumarkt

4x M3x6mm

I added 2 versions:

1 - 4x JST 2.54mm 3P

2- 3 JST 2.54mm and 1x JST 2.54mm 4P

Print Settings

Printer Brand: Prusa
Printer: MK3s+

I used the standard Prusa PETG print profile for 0.2mm layer height.