1 / 4
Dice case / Pouzdro na kostky
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Had a 6 small dices laying freely around so I made a small box to store them.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 92
- Makes
- 1
- Views
- 472
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Had a 6 small dices laying freely around so I made a small box to store them.
Print instructions
The 2 halves of case are identical, each have 2 magnets. I used 5x2,5mm magnets and the holes are just tight enough to press them in with plier, no glue necessary.
Size of dice - 10mm
Printed in PLA, 0,2mm layer height and 15% infill.